What Is Flow Cytometry Light Scatter And How Cell Size And Particle Size Affects It

Light scatter is unfortunately one of the more misunderstood concepts in cytometry.

When you first learn flow cytometry, you were likely told the misleading phrase, “Forward scatter signal intensity is proportional to cell size, and side scatter signal intensity is proportional to cell granularity.”

The short story here is that, yes, this can be the case when we’re dealing with typical cells (consider blood granulocytes, which are bigger than lymphocytes, have more intense FSC signals; granulocytes are more “granular” than lymphocytes and thus have more intense SSC signals). However, the truth is that light scatter complexity is belied by this perennial but unsatisfactory introductory explanation.

While particle size (particle radius) certainly does influence light scatter signal, its intensity is a function of a combination of factors, including:

  •   wavelength of laser illumination
  •   collection angle, and
  •   refractive index of the particle and flow medium (sheath)

It turns out that light scatter intensity has a strong dependence on the relationship between the size of the particle to the wavelength of the laser. More specifically, particles with diameters that are larger than the wavelength of the laser will scatter light with a different pattern than particles that are smaller than the wavelength of the laser.

Keep in mind that we most typically measure scatter using 488 nm excitation (and sometimes 405 nm excitation), so particles or cells with diameters larger than about 0.5 microns will behave differently than particles with diameters significantly smaller than 0.5 microns.

It turns out that there is a physical theory, named after the German physicist Gustav Mie (1869-1957), that predicts and explains the behavior of light scattering of particles larger than the wavelength of illumination. Essentially, Mie’s theory predicts that the intensity of scattered light has a strong angular dependence.

In other words, the intensity of the signal generated from scattered light depends on the angle at which we collect and direct the light towards a detector. Mie’s theory explains why we use a forward scatter (FSC) detector to measure the light scatter signal of typical mammalian cells, which are much bigger than the wavelength of the illumination source (typically the 488 nm laser).

How Small Particles Affect Forward Scatter

Forward scatter detectors collect light at small angles relative to the incident beam and can take advantage of the fact that cells preferentially scatter light in this “forward” direction.

Additionally, because cells scatter so much light in the forward direction, we can save money and use a less sensitive detector to measure this light. As such, forward scattered light is traditionally and often effectively measured with a photodiode, rather than the more sensitive photomultiplier used to measure fluorescence and side scatter.

However, the story is quite different for particles that are smaller than the illumination wavelength (<488 nm or <~0.5 um), like microvesicles and ectosomesIt turns out that light scatter by particles of this size range is NOT dependent on the angle at which it is measured. This has very significant implications for small particle analysis. Most importantly, because small particles do not preferentially scatter light in the forward direction as do cells, the resolution in this detector may not be sufficient to measure or even identify these particles above background.

How Small Particles Affect Side Scatter

Side scatter, given its orientation in the quieter fluorescence collection path, as well as its traditional detection by the much more sensitive photomultiplier tube, will likely have much better resolution than forward scatter.

Similarly, we often use side scatter as the “trigger” or “threshold” parameter when measuring small things like bacteria, microparticles, or microvesicles for the same reason—better sensitivity allows us to better distinguish and measure small particles above background.

Interestingly, scatter gets dim VERY quickly when particles have diameters below the wavelength of illuminating light, considering that scatter intensity decreases with a dependence on r6 of the particle. The bottom line is that small things like extracellular vesicles can be incredibly difficult to detect using scatter signals. This can make publishing flow cytometry data on small particles very difficult.

What Is An Obscuration Bar?

Instrument manufacturers and operators often take advantage of this property of small particle light scatter by installing an adjustable obscuration bar on the forward scatter detector.

The forward scatter obscuration bar is a universal component of this detector that helps to diminish background in the FSC detector by blocking laser light from interacting with the detector. When no particle is present in the laser beam, scattered laser light hits and is blocked by the obscuration bar. On the other hand, when a particle is present in the laser beam, laser light refracted (scattered) by the particle passes over the bar and triggers signal associated with that particle.

An adjustable obscuration bar can be rotated to expose a wider or narrower surface to the laser beam, blocking more or less laser light, respectively, from hitting the detector. To resolve smaller particles from optical noise, it can be helpful to block more laser light from hitting the detector, which can be accomplished by widening the bar.

Moreover, because small particles do not preferentially scatter light in the forward direction, the proportion of signal blocked by the bar of the total signal is less significant than it would be for larger particles, which do preferentially scatter in the forward direction. This strategy is most effective when a photomultiplier tube is used for forward scatter detection than a photodiode, given that the former is much more sensitive than the latter.

This relationship between particle size, wavelength of illumination, and scatter angle can also help explain the side scatter properties of cells. Typical cellular side scatter signal is much more robustly correlated to granularity than forward scatter is to cell size. In fact, the cytoplasmic “granules” that influence side scatter signal are often smaller than 0.5 um and will thus scatter in a non-Mie pattern. Side scatter of mammalian cells and side scatter of small particles are not terribly different after all.

What Is A Refraction Index?

In addition to the wavelength of the laser and the collection angle of the scatter optics, another factor that significantly contributes to the light scattering intensity of a particle is the refractive index of the suspension medium (sheath, which is essentially water) and the particle itself.

For particles that obey Mie’s predictions, light scattering is largely composed of laser light refraction. When a particle or cell is absent at the interrogation point, the laser’s intersection with the particle or cell produces a characteristic refraction, the “ring of diffraction,” that we are most likely acquainted with on sense-in-air cell sorters. This ring of light spreads outwards from the stream in all directions, in the same plane as the laser beam, and is blocked from entering the forward and side scatter detection paths by the obscuration bars in front of each.

However, the presence of a cell in the laser beam changes the composition of the medium through which the light travels. Laser light now passes through the cytoplasm—which contains protein, lipids, and carbohydrates rather than simply the water it passed through in the absence of a cell—which therefore causes the light to bend differently than it does when it passes through the sheath fluid alone. This refraction of light by a cell is a function of the difference in refractive indices (RI) between the media through which light passes, and it causes laser light to bend in such a way that it passes over the obscuration bar and interacts with the detector, generating scatter signal.

Every type of material has an associated refractive index. When light passes from one material to another—say, from the saline of the sheath fluid to the material of the cell and then back through the sheath fluid again—the amount of light that bends due to this transition is proportional to the difference between the refractive indices between the media. The bigger the difference, the more the scatter.

Why Beads Are Not Good For Calibrating Particles

It is precisely this property of light scatter that makes it a terribly unreliable measurement of cell size.

Two particles or cells of exactly the same size may have different refractive indices, due to their composition (e.g. cytoplasmic proteins), and will therefore generate scatter signals with different intensities. This is also precisely why synthetic beads are also terrible size calibrators.

The refractive index of a typical polystyrene bead (1.59) can be significantly different than a cell’s, resulting in very different scatter signals between a bead and a cell of the same diameter. Given the fact that cells are composed of much more water than a polystyrene bead is and that water’s RI is 1.333, polystyrene beads are going to scatter a lot more light than a typical cell would.

According to studies published in Current Protocols In Cytometry, this situation can be even more severe for microvesicles. The study estimates an average and typical RI of a microvesicle to be approximately 1.39. Given the RI of a polystyrene bead at 1.59 and water at 1.333, a microvesicle’s scatter signal may be one to two orders of magnitude lower than that of the polystyrene bead. Here’s the bottom line—beads are not good at calibrating the scale of a scatter parameter in terms of particle size, regardless of whether the particle is a big one or a small one.

However, all is not lost when it comes to identifying microvesicles. Rather than use scatter as a trigger/threshold parameter to identify these kinds of particles and to measure them, the study suggests that fluorescence is a better choice. Small particles can be labeled with a universal dye that causes all membrane-bound particles in a suspension to fluoresce, allowing discrimination of microvesicles from other particles in the solution. There are nuances and caveats to this kind of labeling, but it can provide a much more robust way to identify membrane-bound microparticles than scatter alone.

Light scatter is a fundamental topic to flow cytometry and understanding how cell size and particle size affect light scatter is critical to performing proper flow cytometry experiments. By understanding how small particles affect forward scatter and side scatter, you can collect better data. Knowing what an obscuration bar is and what a refractive index is, as well as how refractive indices are affected by small particles, will help you design experiments that produce publishable data.

To learn more about getting your flow cytometry data published and to get access to all of our advanced materials including 20 training videos, presentations, workbooks, and private group membership, get on the Flow Cytometry Mastery Class wait list.

Join Expert Cytometry's Mastery Class

ABOUT TIM BUSHNELL, PHD

Tim Bushnell holds a PhD in Biology from the Rensselaer Polytechnic Institute. He is a co-founder of—and didactic mind behind—ExCyte, the world’s leading flow cytometry training company, which organization boasts a veritable library of in-the-lab resources on sequencing, microscopy, and related topics in the life sciences.

Tim Bushnell, PhD

Similar Articles

The Power Of Spectral Viewers And Their Use In Full Spectrum Flow Cytometry

The Power Of Spectral Viewers And Their Use In Full Spectrum Flow Cytometry

By: Tim Bushnell, PhD

What photon from yonder fluorochrome breaks?  It is … umm… hmmm. Let me see. Excitation off a 561 nm laser, with an emission maximum of 692 nm. I’m sure if Shakespeare was a flow cytometrist, he might have written that very scene. But the play is lost in time. However, since the protagonist had difficulty determining what fluorochrome was emitting photons, let’s consider how this could be figured out. In my opinion, one of the handiest flow cytometry tools is the spectral viewer. This tool helps visualize the excitation and emission profile of different fluorochromes, as well as allowing you…

3 Must-Have High-Dimensional Flow Cytometry Controls

3 Must-Have High-Dimensional Flow Cytometry Controls

By: Tim Bushnell, PhD

Developments such as the recent upgrade to the Cytobank analysis platform and the creation of new packages such as Immunocluster are reducing the computational expertise needed to work with high-dimensional flow cytometry datasets. Whether you are a researcher in academia, industry, or government, you may want to take advantage of the reduced barrier to entry to apply high-dimensional flow cytometry in your work. However, you’ll need the right experimental design to access the new transformative insights available through these approaches and avoid wasting the considerable time and money required for performing them. As with all experiments, a good design begins…

The Fluorochrome Less Excited: How To Build A Flow Cytometry Antibody Panel

The Fluorochrome Less Excited: How To Build A Flow Cytometry Antibody Panel

By: Tim Bushnell, PhD

Fluorochrome, antibodies and detectors are important. The journey of a thousand cells starts with a good fluorescent panel. The polychromatic panel is the combination of antibodies and fluorochromes. These will be used during the experiment to answer the biological question of interest. When you only need a few targets, the creation of the panel is relatively straightforward. It’s only when you start to get into more complex panels with multiple fluorochromes that overlap in excitation and emission gets more interesting.  FLUOROCHROMES Both full spectrum and traditional fluorescent flow cytometry rely on measuring the emission of the fluorochromes that are attached…

Flow Cytometry Year in Review: Key Changes To Know

Flow Cytometry Year in Review: Key Changes To Know

By: Meerambika Mishra

Here we are, at the end of an eventful year 2021. But with the promise of a new year 2022 to come. It has been a long year, filled with ups and downs. It is always good to reflect on the past year as we move to the future.  In Memoriam Sir Isaac Newton wrote “If I have seen further, it is by standing upon the shoulders of giants.” In the past year, we have lost some giants of our field including Zbigniew Darzynkiwicz, who contributed much in the areas of cell cycle analysis and apoptosis. Howard Shapiro, known for…

What Star Trek Taught Me About Flow Cytometry

What Star Trek Taught Me About Flow Cytometry

By: Tim Bushnell, PhD

It is no secret that I am a very big fan of the Star Trek franchise. There are many good episodes and lessons explored in the 813+ episodes, 12 movies (and counting). Don’t worry, this blog is not going to review all 813, or even 5 of them. Instead, some of the lessons I have taken away from the show that have applicability to science and flow cytometry.  “Darmok and Jalad at Tanagra.”  (ST:TNG season 5, episode 2) This is probably one of my favorite episodes, which involves Picard and an alien trying to establish a common ground and learn…

5 Flow Cytometry Strategies That Sun Tzu Taught Me

5 Flow Cytometry Strategies That Sun Tzu Taught Me

By: Tim Bushnell, PhD

Sun Tzu was a Chinese general and philosopher. His most famous writing is ‘The Art of War’, and has been studied by generals and CEOs, to glean ideas and strategies to help their missions. I was recently rereading this work and thought to myself if any of Sun Tzu’s lessons could apply to flow cytometry.  So I have identified 5 points that I think lend themselves to thinking about flow cytometry.  “Quickness is the essence of the war.” In flow cytometry, speed is of the essence. The longer the cells are out of their natural environment, the less happy they…

A Basic Guide To Flow Cytometry (3 Foundational Concepts)

A Basic Guide To Flow Cytometry (3 Foundational Concepts)

By: Meerambika Mishra

Mastering foundational concepts are imperative for successfully using any technique or system.  Robert Heinlein introduced the term ‘Grok’  in his novel Stranger in a Strange Land. Ever since then it has made its way into popular culture. To Grok something is to understand it intuitively, fully. As a cytometrist, there are several key concepts that you must grok to be successful in your career. These foundational concepts are the key tools that we use day in and day out to identify and characterize our cells of interest.  Cells Flow cytometry measures biological processes at the whole cell level. To do…

Which Fluorophores To Use For Your Microscopy Experiment

Which Fluorophores To Use For Your Microscopy Experiment

By: Heather Brown-Harding, PhD

Fluorophore selection is important. I have often been asked by my facility users which fluorophore is best suited for their experiments. The answer to this is mostly dependent on whether they are using a widefield microscope with set excitation/emission cubes or a laser based system that lets you select the laser and the emission window. Once you have narrowed down which fluorophores you can excite and collect the correct emission, you can further refine the specific fluorophore that is best for your experiment.  In this blog  we will discuss how to determine what can work with your microscope, and how…

4 No Cost Ways To Improve Your Microscopy Image Quality

4 No Cost Ways To Improve Your Microscopy Image Quality

By: Heather Brown-Harding, PhD

Image quality is critical for accurate and reproducible data. Many people get stuck on the magnification of the objective or on using a confocal instead of a widefield microscope. There are several other factors that affect the image quality such as the numerical aperture of the objective, the signal-to-noise ratio of the system, or the brightness of the sample.  Numerical aperture is the ability of an objective to collect light from a sample, but it contributes to two key formulas that will affect your image quality. The first is the theoretical resolution of the objective. It is expressed with the…

Top Industry Career eBooks

Get the Advanced Microscopy eBook

Get the Advanced Microscopy eBook

Heather Brown-Harding, PhD

Learn the best practices and advanced techniques across the diverse fields of microscopy, including instrumentation, experimental setup, image analysis, figure preparation, and more.

Get The Free Modern Flow Cytometry eBook

Get The Free Modern Flow Cytometry eBook

Tim Bushnell, PhD

Learn the best practices of flow cytometry experimentation, data analysis, figure preparation, antibody panel design, instrumentation and more.

Get The Free 4-10 Compensation eBook

Get The Free 4-10 Compensation eBook

Tim Bushnell, PhD

Advanced 4-10 Color Compensation, Learn strategies for designing advanced antibody compensation panels and how to use your compensation matrix to analyze your experimental data.